led light

got a old mouse care of microsoft of course.

whats left inside is the switch

put on the 9 volt inside solder...put some resistor..etc.. after a few moments...let there be light

future plans: put 5 white led lights in series

snesPADpc

This aint a comprehensive stepBYstep way to make yourself a SNES pad PC(just wanna show you how).

You will need:
1)5 signal diodes-1n148
2)1 printer cable(db25)
3)controller port of a supernes
4)junk cdrom drive
5)snes console




Use the controller port of the Snes console ,and for the Cdrom of the casing and the front panel minus the popping cover only. Glued them together(use epoxy).




Solder the wires of the DB25(the female end) to the controller port



After the gluing and strapping in the wires here is how it look like.Now put it in(above the cdrom drive)


As for the other end of the DB25 cable




finish product


driver used for connecting the controller of a Super nes with the parallel port of PC
PsxPAD